With our move to the East Coast, we had to do some downsizing. While we had two living areas in our first house in Texas, we now only have one. That meant I had to stick with only my favorite things from each and somehow make them work together. Enter this rug:
It wasn’t terrible as it was. Yes, a little brown in the high-traffic areas while the center showed its cream beginnings, but I got it off of Craigslist for forty bucks four years ago and I still think it was a heck of a steal. Now that things have changed, though, it needed a makeover.
Right now, the overdyed look is really hot. I’m seeing it everywhere.
This one in Mara Ferreira’s home on Glitter Guide was what I was going for:
Rugs of the size I needed in that style range from $300 used-$650 new. Plus, I’m all about reducing and reusing. I scoured the internet for some advice on going about it myself. First, I found a post about overdying a rug from The Red Brick. Her post was detailed, but she used silk screening ink, which I have zero experience in. I decided I wanted to use RIT dye, because I’ve dabbled in RIT dye quite a bit, like when I made Tobias’ baby Bam Bam Rubble Flintstones costume.
I found some advice using fabric dye from Apartment Therapy, where a woman used a spray bottle for a smaller rug, and A Girl Named Wallis, who wrote a super funny post on how she made a Monet/Anthropologie inspired rug using RIT dye.
Despite my research, I was still nervous about such a big project, and the likelihood that I could destroy my not-terrible rug. I waited until I had the help (and boost of confidence) from my friend who visited from down south before I began.
I can see the nearest craft store from my yard. It’s amazing. But it’s not open yet, so it is a bit of a drive to the second closest one. In fear of having to return to the store, we bought three bottles of teal RIT dye and three aquamarine, bringing the total to six bottles for a 6×9 (ish) rug. (Spoiler alert: we didn’t need that much. We needed about 2/3 of that.)
- 3 bottles teal RIT liquid dye
- 3 bottles aquamarine RIT liquid dye
- a tarp!
- 1 gallon bottle of white vinegar
- A clean trash can for mixing
- A spray bottle (I emptied out a Windex bottle into a vase, washed it, and when I was done, I put the Windex back.)
- Smaller bowl (for distributing the dye bath)
- Something to stir the dye bath (we used a broom handle)
1. First off, we mixed the dye with vinegar, and added hot water. The water has to be hot for the fibers to take on the dye, so don’t try to cheat the system by using the water hose. We followed the instructions per the bottle and did it in increments, but always following a 1:1 ratio for teal to aquamarine.
2. Whenever we had a full batch of dye bath, we’d use mixing bowls to pour it on top of the rug that we had situated outside, on a tarp. The dye would pool in places, because the terrain is uneven, so we used the bottom of the bowl to push the bath out of those places and into spaces where it was more sparse.
3. At some point, we realized that the backing that was falling off (due to age, prior to the project’s beginning) was going to keep the rug moist way longer than we wanted, so we did away with it. (optional & situational)
4. I knew from past experiences with RIT that your dyeing isn’t done until you think the color is WAY too bright. There will be plenty of fading when you rinse. We waited for it to dry, to see if we needed some additional dye in other places, and it did. That’s when the spray bottle came in.
The spray nozzle didn’t work well this way, so I had to use the bottle it came with. This part was super tedious, and surely I have the forearms of a pubescent boy after all the squeezing to get enough dye out. I’m not sure if this is a necessity, but I really wanted the color to be even.
5. Let it soak. I took it off the tarp and put it on my cement porch, because the moisture was just stuck under it with the tarp*. I waited a couple of days, and I almost didn’t rinse it at all, because A Girl Named Wallis said she didn’t in her post. But, y’all. I’ve got white floors. I couldn’t run the risk of dyeing more than the carpet. So after a couple of days of letting it dry, I dumped a lot more water on it, and then waited more days.
I had a few more hiccups*, but ultimately, it ended up like this:
And I just love it!
*Hiccups: I’ve always got some hiccups. Here are some things to watch out for:
- The rug is SO heavy when it is wet. Maybe you already considered that, but I didn’t. Find a spot where there won’t be a bunch of leaves and a time of year where it won’t get rained on and stick to it.
- This is a warm, sunny weather project, but I couldn’t help when I moved up here and I’ve got a kind of attitude when it comes to making things. It took FOR-E-VER to dry.
- In fact, I waited a week but it still wasn’t dry and I wanted it in my dining room already (see Willy Wonka image above) so I went for it. Well, it got dry more quickly in my heated home…and then it started to mildew. And stink. A LOT. I tried to use traditional carpet cleaners and powders, but ultimately what worked was this baking soda carpet cleaning technique. If you run into this problem, save your money and don’t fall for cleaner gimmicks, and save yourself some time and just go ahead and get 5 boxes of baking soda and apply that stuff liberally.
- As with all dye projects, I should have tested the color out first. RIT’s “teal” came out a more hunter green. In the post I mentioned earlier, her “deep green” was sometimes purple (?!) but, in all cases, you get what you pay for. Double check!